X-Ray Fault Detector for Steel Cord conveyor Belt-Hand-Held type
Manufacturing & Processing Machinery Engineering & Construction Machinery
MOQ:1 Piece(s)
Payment Method : T/T
Keywords:X-ray detector conveyor belt manufacture splice movement
| Product Category: | Manufacturing & Processing Machinery > Engineering & Construction Machinery | Trademark: | Dedicated |
| Product Package: | carton | Specifications: | 960*430*155 |
| Place of Origin: | China | Port: | Shanghai /Tianjing |
1.Product Introduction
· Hand-held X-ray fault detector is a small machine for perspective purpose by imaging with X-ray principle, which is specially used in mining companies.
· By inserting the fault detector parallel to the ends of the upper and lower surfaces of the conveyor belt and switching on the power of fault detector, the wire cables inside the conveyor belt can be clearly displayed.
· Different damages, such as wire breakage, wear, fatigue, rust and joint twitch, inside the steel-cord conveyor belt can be clearly detected through the display screen of the flaw detector, and the defective parts of the steel-cord can be photographed for storage and remote transmission.
The detection site can be observed in time through the built-in display screen
Remote observation can be realized through wireless connection with mobile phone/tablet/laptop
2.Features and advantages :
Small size
L960mm*W430mm*T155mm
Light weight
The weight of the detector is 8kg, and the total weight including the suitcase is 22kg
Clear imaging
The detection card, with a resolution of 50 lp/cm, can take the complete photo of every subtle link of the entire belt
Pictures can be stored
The detected damages can be photographed by pressing the shutter, with the damage data stored in the memory card in the form of pictures for easy playback and storage
Diverse image viewing devices
The detector transmits signals to image viewing devices, such as mobile phone/tablet/laptop, wireless
Low radiation
Radiation at any angle 1M away from the X-ray tube will not jeopardize human health
Low price
It is the cheapest X-ray fault detector for steel-cord conveyor belt on the market
Package of the equipment
3. Product Parameter:
Performance parameter | |
Penetration | Strong belt with a thickness no greater than 30mm can be penetrated |
Display Diameter | Φ76mm |
Operating Voltage of the X-ray Tube | 75 kV |
Operating Current of the X-ray Tube | 0.4 mA |
Image Resolution | ≥40 line pairs/cm |
Gray Scale | ≥10 Level |
Contrast | ≥4% |
Weight | 8kg/9kg |
Transmission between the Detector and the Image Viewing Device | wireless transmission |
Battery Parameters | 24V, 1.5AH |
Charging Voltage | 220V AC, with a charging time of 4-6 hours |
Detection Time | it can be continuously used for 60s each time, and the battery can last 40min |
4.Product Physical structure:
Product size and weight:
There are two models of this products: Long-armed and Short-armed
Specifications | L*W*T | Detection Depth | Detection Thickness | Detection Range | Weight with Suitcase | Net Weight |
Short-armed | 960*430*155mm | 800mm | 30mm | Φ76mm | 22.5kg | 8kg |
Long-armed | 1200x430x155mm | 1100mm | 30mm | Φ76mm | 25.5kg | 9kg |
5.Comparison of advantages and disadvantages among the three types of X-ray detectors for steel-cord conveyor belt
S/N | Detection Content | Fixed | Mobile | Hand-held |
1 | Whether it can detect the steel-cord in conveyor belt | Yes | Yes | Yes |
2 | Whether the image of the steel-cord detected is clear | Clear | Clear | Clear |
3 | Whether the conveyor belt needs to be shut down for detection | No need | No need | Need |
4 | Conveyor belt area that can be detected at each time | Entire belt | Entire belt | Φ76mm |
5 | Time required to detect a complete conveyor belt | 20min-90min | 20min-90min | Unable to detect a complete belt |
6 | Detection of wire cable breakage, rust and split | Accurate | Accurate | Unable to detect, only able to verify |
7 | Detection of joint twitch of conveyor belt | Relatively accurate | Relatively accurate | Unable to detect, only able to verify |
8 | Equipment price | High | High | Low |
9 | Purpose of the development of the device and target customers | Applicable to the fixing, installation and real -time safety monitoring of the conveyor belts in key transport links of mining enterprises | Used by belt service providers to detect and maintain multiple conveyor belts of the mining companies | Used to verify and detect the defect of conveyor belt found manually |
Test case
| Contact Name: | Mrs Sara Shang | Contact Email: | sa****1@sxddck.com |
| Contact Job Title: | Sales And Marketing | Contact Mob: | 183***665 |
| Contact Tel: | Contact Fax: | ||
| Address: | NO.32 Gaoxin Str., Taiyuan, Shanxi, China. | Website: | http://www.sxddck-en.com/ |
Provider of Steel Cord Conveyor Belt Safety Solutions
Shanxi Dedicated Measurement Control Co., Ltd. is an enterprise located in China, the earliest and biggest high-tech enterprise integrating R&D, production, manufacturing and sales, a technology leader in the field of "on-line detection of conveyor belt". In 2009, we made the world's first X-ray fault detector for steel-cord conveyor belt. Since established, we have been dedicating on one thing only: perfecting and optimizing the detector and making it outstanding.
