SUTOP CIFT ELASTIK- Cement and Acryllic-Based Double Component Elastic Water Insulation Material
Construction & Decoration Building Structural Material
MOQ:1 20' Container
Payment Method : L/C T/T D/P
Keywords:Water Insulation
| Product Category: | Construction & Decoration > Building Structural Material | Trademark: | |
| Product Package: | 25 kg polyethylene-reinforced kraft paper bags, B Component: 10 kg’l?k plastic drums (delivered in pallets or as sling-bags upon request.) | Specifications: | Water Vapour Permeability Class I Shear Tensile Adhesive Strength With no traffic load / Flexible Class of Reaction To Fire E Adhesive Strength, N/mm2 ≥1 Capillary Water Absorption, (kg/m2h0.5) Max 0,1 Crack Bridging Ability, mm > 0,75 |
| Place of Origin: | Turkey | Port: | Istanbul |
SURFACE PREPARATION
- The surface of application shall be free solid, clean, free of dust and level.
- The surface shall always be free of materials such as form oil, paint, dust etc., and shall be fully cured.
- Parts on the surface (iron, wood, etc.) shall be removed and these hole shall be filled with appropriate Entegre Repair Mortars.
- You may advance to application after dampening the surface.
PREPARATION of the MORTAR
- A proper amount of fluid component shall be put inside the mixing vessel (10 kg of fluid/25 kg of powder).
- Whole bag is poured to the vessel, and stirred with hand mixer until the lumps are removed.
- After resting for 5 minutes, the mortar shall be stirred again.
- ENTEGRE CHAMFERING TAPE shall be applied to the connection points of the application surfaces using EPODOL?.
- If you do not prefer chamfering tapes, bring the connection points to an oval form and reinforce them with nets.
- Fluid mortar shall be applied with a brush or a roll.
- Second coat shall be perpendicular to the first coat and shall be applied at least for 6 hours later.
- Wait 3 days for application of final coat (ceramic, screed and cement-based plaster), and take care to prevent mechanical damage to the insulation material during coating.
- If the application area is a water tank, wait at least 28 days for the curing of the product.
CONSUMPTION
1.5-2.0 kg/per m2 for single coat
(Under proper surface and ambient conditions.
It may differ as per surface specifications and application conditions.)
| Contact Name: | Mr. Devrim Aydin | Contact Email: | de****n@entegreharc.com.tr |
| Contact Job Title: | Export Manager | Contact Mob: | 532*** 96 |
| Contact Tel: | +90 (216) 434 50 96 | Contact Fax: | +90 (216) 434 50 31 |
| Address: | Huseyinli Koyu, Beykoz Cad. No: 222/4 Cekmekoy - Istanbul | Website: | https://www.entegreharc.com.tr/en |
Since the date of our establishment, we have created value with our pioneering and innovative structure. We have started our activities with lime production in1978. We have developed ourselves, and our industry has developed with us. We have specialized in plasters and mortars, and we proved our success in these areas. We have proceeded with the principle of continuous development and innovation. Entegre started the first industrial plaster production in Turkey by introducing “Sivamatik”, the cement based machine applied ready-mixed plaster, in 1990; “Alcimatik”, the first gypsum-based machine applied ready-mixed plaster, in 1992; and “Colormatik”, the first cement-based machine applied coloured plaster, in 1996. Entegre has wide range of products with high-quality and cost-effective solutions; and adding value to every side of the buildings from foundation to the roof. Entegre Harc’s product lines are comprised of cement based plasters and mortars, gypsum based plasters, decorative plasters, technical mortars, waterproofing products, thermal insulation systems, tile adhesives and grouts, lime and aggregate. We know the requirements of the industry. We invest for building solid structures. As Entegre, we are always right beside you with the most accurate and best quality solutions for each part of the building.
