Anti-slip aggregate ceramic  

Part One: The Technical Data

Part Two: Anti-slip aggregate ceramic

Material selection: Choose suitable raw glaze materials according to the production formula. After the ball is crushed to the required standard, iron is removed and sieved. Mud is dewatered by press filtration and dewatered in vacuum for mechanical molding; for chemical slurry process, the mud is first press-filtered and dewatered, and then decoagulant is added to the slurry, iron is removed and sieved for use; for grouting, the slurry is After vacuum treatment, it becomes the finished pulp, ready for use.

Forming: drying, trimming, spare.

Firing: After obtaining the white body, enter the kiln for biscuit firing, after finishing, glazing, glaze firing, and selecting the ceramic particles after leaving the kiln to obtain qualified ceramic particles.

Color baking: the qualified ceramic particles are selected to obtain qualified finished products.

Packaging: The ceramic particles are packaged according to different matching methods and various requirements, that is, the final product is formed, and shipped or stored.

Part Two: Anti-slip aggregate ceramic advantages:

A. Glue bonding strength.

The bonding agent must have sufficient bonding strength, because it not only needs to be firmly bonded to the substrate concrete or asphalt, but also needs to be firmly bonded to the colored ceramic particles (here refers to when the glue does not completely cover the colored particles) .

B. Curing and drying speed.

Colored non-slip pavement cannot be closed for a long time during construction. Therefore, the construction period is required to be short and fast. At this time, the adhesive must be dried quickly and have a suitable use period, so that the construction operation is more convenient.

 C. The rate of increase in intensity.

After the construction of the colored non-slip pavement is completed, it will be officially opened soon, and there will be vehicles driving. Therefore, in order to reduce the time of closing the road to a shorter time, the strength of the adhesive is required to meet the requirements for use in a short time.

D. Impact resistance toughness.

Vibration occurs when the vehicle is driving on colored roads, and it will cause slight deformation over time. At this time, the bonding must not be brittle materials, because brittle materials can easily lead to cracks, bursts or fall off.

E. Outdoor weather resistance.

The color pavement is outdoors, so it must have good corrosion resistance, weather resistance and temperature difference resistance. Otherwise, the material will age, resulting in the loss of the original goodness and reduced service life.

Part Three:  Project Steps

Decontamination: remove dust, gravel and other debris within the construction scale.

Check: Use tape to maintain the construction scale, and the marking inspection hole also requires maintenance.

Primer: The foundation of cement pavement is only needed, and the foundation of asphalt pavement is not used.

Resin coating: spray ring curing resin or acrylic resin to coat the road surface.

Laying: Sprinkle colored sand evenly on the sprayed resin with a shovel or other tools.

Take back: After the resin has hardened, take back the colored sand that has not adhered to the resin.

Beautiful processing: external appearance deployment processing.

Construction Notes:

A. Requirements for the road base: If it is an asphalt base, the Anti-slip aggregate ceramic  should be laid 2 months after the pavement is poured. If it is a concrete base, it is necessary to pave the ceramic particle non-slip pavement one month after the pavement is poured. The construction road should be smooth and dry. If the road is uneven, it will increase the use of materials

B. Cleaning of the road base: Use a high-pressure water gun to clean the road. After the road is dry, use a road vacuum cleaner or a hair dryer to remove all the dust and impurities on the road. If the road has potholes or damaged places, advanced repairs are required.

C. Sprinkle ceramic particles: Sprinkle the colored ceramic particles evenly on the special ground glue of the primer and completely cover the ground glue with a surplus. 5-6kg/m2