This machine mainly has work table, four sets of hydraulic four-jaw self-centering chucks, a mobile gantry, a mobile sliding saddle, a drilling and milling power head, an automatic lubrication device and a protective device, a circulating cooling device, a digital control system, and an electrical system. Etc composition. The supporting and guiding of the rolling line guide and the precision lead screw drive, the machine tool has high positioning accuracy and repeated positioning accuracy.

1.Bed work table:

The bed is made of steel structural parts. It is finished by secondary tempering treatment. It has good dynamic and static rigidity and does not deform. The working table uses four sets of 500mm four-jaw self-centering hydraulic chucks for fast clamping of workpieces. Two ultra-high-capacity linear rolling guide pairs are installed on both sides of the bed. After positioning, the two sets of imported high-intensity locking The powerful rail clamp is firmly positioned and locked on the rail. The clamp fits perfectly without damaging the rail slider. The clamp opening and closing time is only 0.06 seconds, which greatly shortens the processing time. The drive system uses a bus absolute servo motor and precision The ball screw drives the gantry to move in the Y-axis direction. Adjustable bolts are distributed on the bottom of the bed, which can easily adjust the level of the bed table.

2.Mobile Gantry:

The mobile gantry is cast with gray iron 250. The height of the heavy beam is 800mm to enhance its strength. Two super-high-capacity rolling linear guide pairs are installed on the front side of the gantry. The blue slider uses a precision ball screw pair and a servo motor to move the power head slide in the Y axis direction. A drilling power head is installed on the power head slide. The movement of the gantry is realized by the servo motor driving the ball screw mother to rotate on the ball screw through a precision coupling.

3.Mobile sliding saddle:

The mobile sliding saddle is a precision cast iron structural component. The sliding saddle is widened and increased to increase the center distance of the guide rail. Two sets of ultra-high-capacity rolling linear guide rail pairs and precision ball screw pairs are connected to the high-precision arm The brake servo motor drives the drilling power head to move in the Z-axis direction, which can realize fast forward, industrial advance, fast rewind, and stop of the power head. With automatic chip breaking, chip removal, pause functions.

4.Drilling power head:

The drilling power head uses a dedicated servo spindle motor. The precision mechanical spindle is driven by the deceleration of the toothed synchronous belt to increase the torque. The spindle uses front three, two, and five-row Japanese angular contact bearings to achieve stepless speed change. Quick and easy replacement, the feed is driven by servo motor and ball screw. The X and Y axes can be linked, and semi-closed loop control can be used to achieve linear and circular interpolation functions. The spindle end is a BT40 tapered hole, equipped with a Rotofoss high-speed rotary joint in Italy, which can use a high-speed U-drill center to produce water.

5. Flat chain automatic chip conveyor and circulating cooling device

This machine is equipped with a flat chain automatic chip conveyor and a chip collector. The circulating cooling device is equipped with a paper filter, which has a high-pressure internal cooling pump and a low-pressure external cooling pump for the internal and external cooling of the tool.

5.1 Automatic lubrication device and protective device:

This machine is equipped with Taiwan's original volumetric partial pressure automatic lubricating device, which can automatically lubricate the guide rails, lead screws and other moving pairs, and there is no dead angle to ensure the service life of the machine. The X-axis and Y-axis of the machine tool are equipped with dust-proof protective covers, and waterproof splash guards are installed around the workbench.

6. CNC control system:

6.1. With chip breaking function, chip breaking time and chip breaking cycle can be set on the man-machine interface.

6.2. With the tool lifting function, the tool lifting height can be set on the man-machine interface. When drilling to this height, the drill bit is quickly raised above the workpiece, and then the chip is smashed, and then fast-forwarded to the drilling surface and automatically converted to the work.

6.3. The centralized operation control box and handheld unit adopt a numerical control system, and are equipped with a USB interface and an LCD display. In order to facilitate programming, storage, display and communication, the operation interface has functions such as man-machine dialogue, error compensation, and automatic alarm.

6.4. The equipment has the function of previewing and rechecking the hole position before processing, and the operation is very convenient.