General Purpose Excellant Acetic Silicone Sealant
Construction & Decoration Door,Window & Accessories
MOQ:2400 Piece(s)
Payment Method : L/C T/T
Keywords:silicone silicone sealant acetic silicone GP Silicone
| Product Category: | Construction & Decoration > Door,Window & Accessories | Trademark: | MAGPOW |
| Product Package: | In export carton | Specifications: | 280ml/pc, 24pcs/ctn |
| Place of Origin: | CHINA | Port: | GUANGZHOU |
Main Composition:
α , ω -Dihydroxyl Methyl Silicone
Feature:
The product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in the air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Have transparent, grey, white and black colors for selection.
Scope Of Application:
This product are widely used for bonding of glass, rubber, wood, pottery, metal and surface of fiber, this product not suitable to use under water, and not suitable for bonding of dope, please finish brushing before construction.
Using Method:
1. Clean the surface to get rid of the rust, oil, or any dirty.
2. Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
3. In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.
4. If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5. After completely solidify, amend the glue by knife.
Warning:
1. It is not preferred for the applying at the air-tight situation. Keep ventilative during the operation as the acetic acid is released due to the chemical reaction.
2. Re clean the surface if operating could not be finished within 1 hour since first cleaning. Re clean the surface as well if rains or dirty is onto the surface again.
3. No toxic of product. But be careful not to make the glue get into the eyes or nose. Wash them at once if does.
4. Keep smooth and continuous during applying of the glue onto the sealing surface. The adhesive performance would be not good if the air get in.
5. Tighten the lid at once and take off the extrusion nozzle after gluing to avoid entering of the wet air and causing of the solidifying. Eliminate the remnants around the nozzle.
6. Remove the solidified glue on the bottleneck during re applying. The unsolidified glue inside could be used still. Store the rest glue of the bottle at air tight and shade.
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble, affects the seal effect.
4. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40oC, relative humidity 40-80%
Storage And Packing:
1. The product is nonflammable. Keep dry and shade, air tight during storage.
2. The shelf life for grade acetic silicone sealant is 12 months and 9months for the medium grade, 6months for ordinary grade.
3. Packing specification: 85g in soft plastic tube; 280mL/PC, 300 mL/PC, in plastic barrel
Technical Data
| No. | Item | Parameter | ||||
| Top grade silicone sealant | Medium grade silicone sealant | |||||
| 1 | Appearance | Exquisite well-proportioned cream, no no agglomeration, no gelling. no bubble, hard dispersing | ||||
| 2 | Prolapse distance | vertical mm | ≤ 3 | |||
| Aclinic | No distortion | |||||
| 3 | Density | 0.98-1.03 | 1.34-1.42 | |||
| 4 | Extrusion , ml/min | ≥ 400 | ≥ 400 | |||
| 5 | Surface setting Time,mm | 5-20 | 5-20 | |||
| 6 | Shao's Hardness | 20-40 | 20-40 | |||
| 7 | elongation Mode /MPa | 2 3 C Standard | ≥ 0.4 | / | ||
| Under water | ≥ 0.4 | / | ||||
| Water-Ultraviolet radiation | ≥ 0.4 | / | ||||
| 8 | Bonding destroy area % | 2 3 C Standard | ≤ 5 | ≤ 10 | ||
| Under water | ≤ 5 | / | ||||
| Water-Ultraviolet radiation | ≤ 5 | / | ||||
| 9 | Elastic recover rate% | ≥ 90 | ≥ 80 | |||
| 10 | Extend bonding rate | 60% damage | 60% damage | |||
| 11 | Setting time mm/24h | 3-8 | ||||
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
| Contact Name: | Miss Mary Xu | Contact Email: | as****a@magicglue.net |
| Contact Job Title: | Export Manager | Contact Mob: | 139***659 |
| Contact Tel: | 0086 731 83285111 | Contact Fax: | 0086 731 83285126 |
| Address: | LANSI ROAD, CHANGSHA NATIONAL BIOMEDICAL BASE, LIUYANG, CHANGSHA, CHINA | Website: | www.magicglue.net |
Hunan Magpow Adhesive Group is a Hi-tech enterprise in developing, manufacturing and sales of all kinds of adhesive with head office in Hunan International Commerce in Changsha City. The company is authorized as Hunan provincial famous brand, the implementary unit of national torch program, the qualification by ISO9001: 2000 international quality system, the member of China Adhesive Industry Association. Main product with ′ Magpow′ Brand is authorized as Hunan provincial famous trademark.
The company has powerful researching ability by long-term hiring foreign adhesive experts from Germany, France and national-wide famous experts for development of technology and technical instruction. Products include epoxy steel, super glue, gasket maker, resin, water-base wood glue, silicone sealant, contact cement, PVC glue, foam glue, mouse-killing glue, fly-killing glue ect which is used in architecture, stone manufacture, army industry, fireworks and art for curing, sealing and solidifying and curing of hardware and commodity in more than 60 countries and districts in southeast Asia, Europe and Africa. The company wants to create limitless value for you by its so many years accumulation.
