OEM 7 Stages Under Sink UV Sterilizer Water Purifier Alkaline Mineral Water RO System

Using Tips:

1. The product should be turned off promptly if there is leaking water;
2. To ensure purifying efficiency, We recommend user to replace the filter according to replacement cycle;

3. When the water suddenly becomes considerably larger flow, Please do not drink the water;
4. Ask professional person to repair or alter the product ;
5. When moving the product, please do not pull the PE pipe in case of leakage;
6. When the product is not used for a long time, turn off the water supply and power supply;
7. Do not use the rated voltage power that is disproportionate;
8. After first time use it or a short time (within 1 month), when start to use it, first two tanks of produced water should be drained; after long-term (over 1 month) stopped use it, when start to use again, should replacement activated carbon filter;
9. Use detergent to scrub it, please do not to use gasoline, alcohol and other solvents to scrub it.

Installation Note:
1. Do not install under sunlight or nearby flammable objects;
2. The product working temperature 5 to 45 degrees;
3. The product can not filter hot water, please do not connect it to water heater.
4. Before use it, installation of the product should be well fixed to prevent product to turn down;
5. If the tap water pressue is higher than 0.4Mpa, please install the pressue limiting valve before the product;
6. Do not arbitrarily remove the parts on the product, to prevent leakage and damage to the machine;
7. PE pipe and fittings should installed in place;
8. Water tee, no seals should be wrapped with raw materials, there is a ring of raw materials can not be wrapped around the band;
9. After the installation is completed, you should turn on the water and goose neck faucet, after 5 minutes, close goose neck faucet , and check there leaks;
10. Pure water end and waste water end can not be inversely connected.