ALCIMATIK PLUS Gypsum-Based Projection Plaster

APPLICATION

SURFACE PREPARATION  

• The surface must be cleaned from form oil, dust, paint and adherence reducing materials.
• All the holes should be filled and repairs must be made with appropriate Entegre product before plastering.
• Application surface must be dampened with water before application if required.

PREPARATION of the MORTAR  

• ALCIMATIK PLUS, is mixed (14 lt water / 25 kg bag) and sprayed on the surface with a plastering machine.

• Application thickness should be between 8 mm and 25 mm in the first coat.

• If the thickness is more than 25 mm, second coat is applied in max. 25 mm thickness.

• Surface is levelled. Approximately one hour later after the latest application, it is levelled again.

• When surface becomes hard that it can not be levelled, it is smoothed by steel spatula.

• ALCIMATIK PLUS surface is dampened and trifled to have a satin surface.

• According to weather conditions, after 10-15 min, by applying steel trowel, perfect surface is obtained.

• After 2 hours when the surface becomes tough, it is dampened and finished by steel trowel.

CONSUMPTION

For 1 cm plaster thickness, the consumption is approximately 8,0 kg/m2