APPLICATION

SURFACE PREPARATION  

• The surface will always be free of form oil, dust, paint and materials that reduce adherence.

• Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.

• Application surface should be dampened with water, if required. PR?MEL 600^? BETOKONTAK is used for adherence increasing primer before application on bright fair faced surfaces, concrete ceilings and walls.

• You can advance to application when the surface is cured.

PREPARATION of the MORTAR  

• Water will be put to the mixing vessel first, then AL?IPER^? should be added (17-18 l water/35 kg bag) and it should be stirred until the lumps are removed.

• Stop for 5 minutes, and stir again to achieve a homogeneous mixture.

• Application thickness should be between 8 mm and 2.5 cm in one coat. If the thickness is more than 2.5 cm, a second coat is applied in max. 2.5 cm thickness before the first coat is set.

• The mortar prepared should be applied with a mortar board or a plastering trowel. Then, the surface must be levelled.

• ALCIPER^? and SATENPER^? will be mixed and applied on the surface.

• In order to finish the surface and prepare it for painting, the surface should be smoothed with a final coat of SATENPER^? after the hardening of the surface.

CONSUMPTION

Approx. 10,0 kg/m2 for 1 cm of plaster thickness