SELFFIX - Cement Based Grout Mortar

APPLICATION

SURFACE PREPARATION  

• The surface of application shall be free of residues that may prevent adhesion. 
• Moving parts with low adherence shall be moved away from the surface. 
• Corrosion on metal parts shall be removed and contact with mortar shall be prevented using an anti-corrosion agent. 
• Absorbent surfaces shall be saturated with water. 
• Ensure that the mould where the application shall be performed is well cleaned and water-proof, and fix the mould securely. 
• Water collected on the surface shall be moved away before application.

PREPARATION of the MORTAR  

• Add powder material to the mixture water put inside a clean mixing vessel (3.5-4,0 lt water/ 25 kg powder), and mix using a hand mixer with low speed at this time.
• Mix 3-4 minutes more until a homogeneous mixture is achieved after adding all powder.
• It shall be used in 15-20 as it sets quickly.
• The mortar prepared shall be applied with an injection pump or by self dissipation depending on the application. 
• Times specified may differ as per ambient temperature and surface temperature, and the times are reduced at lower temperatures and increased in higher temperatures.

CONSUMPTION

Powder Consumption: 1.9 kg/l