Knitted mesh & demister

Mesh demister (or named mesh mist eliminator) is used to remove gas entrainment fog (droplet), recycle expensive droplet (precious materials), or purify gas to reduce gas impurities. Mesh mist eliminator is made of the 0.15mm~0.25mm corrosion-resitant metal wire (or PP, PTFE & other types engineering plastics) with woven mesh of a special material type by pressed into a mesh type wave (W shape) formed after the cross-stack shop.

Wire-mesh demister (or named mist eliminator), mainly used to separate drops of the diameter within 3μm to 5μm, the operating principle is, when the gas carrying liquid foam is rising on a certain speed and passing through the wire mesh pack on the grid bar, because of the inertia, the liquid foam will be collided with and adhered to the metal wire surface, with diffusing and subsiding continuously, it will be form a bigger liquid drop and flow to the wire cross along the wire. Because of the wire humidified, the liquid surface tension and the capillarity capillary action, the liquid drops will be bigger and bigger, till separated and fall down when its own weight exceed the resultant force come from both of buoyancy of the rising gas and surface tension of liquid. As the end, it flow into the container for next device. With the proper gas speed and other operation conditions, the efficiency of foam remove will be up to 97% high after the gas pass through wire-mesh demister. The purpose of removing foam will be achieved completely.

The characteristic of wire-mesh demister
. Structure simple, weight light.
. High factor of porosity, low head loss.
. Great contact surface area, high removing foam ratio.
. Convenience of installing, operating and repairing.
. Long service life.

Email: info@wiremesh24.org

Mobile: +86-(0)13831833600

Contact: Susan

http://www.wiremesh24.org