2020 New Fully Automatic Wire Mesh Machine 

Introduction:

• The line wire and cross wire are pre-straightened and cut wire as material supply.

• The line wire and cross wire both with automatic falling device

• This production line could weld the common mesh with single cross wire and single line wire

• This production line could weld the common mesh with single cross wire and single line wire & mesh with V groove

• This production line could weld the mesh with double cross wires and single line wire in middle

• This production capacity of 100 pcs double wire mesh/hour @ mesh size: Wire diameter: 3-8mm, mesh length x width: 2500x2500mm, single line wire spacing 50mm, double cross wire spacing 200mm     

Usage:
Mainly used in  highway, railway, bridges, buildings and infrastructure projects etc. 

Advantages:

• CONET patent product, patent number: ZL2012 1 0372572.3

• All the pneumatic components brand FESTO from Germany.

•  PLC touch screen control system brand SIEMENS.

• Adopts Schneider servo system, the common motor brand ABB or SIEMENS.

•  Equipped with ABB 800KVA master switch system with electric leakage protection function and over-load protection function.

• The material of the welding electrode is copper alloy with square shape which can be turned . Welding electrode, welding transformer all adopt forced water circulation cooling system.

• Equipped with wireless communication function. Could monitor the running status of machine through APP of mobile phone.

• Fast welding speed, steady production. eg. 3000mm width x 2030 mm length, single line spacing 50 mm & double cross wire spacing 200 mm,  double wire mesh output not less than 100 pieces per hour. 

• This production line could weld the common mesh with single cross wire and single line wire; Also could weld the common mesh with V groove; Also could weld double wire mesh with double cross wires and single line wire in middle.

Technical Parameters: