T-Ceiling production line

Machine parameter：

Main tee:

1. 2 tons manual de-coiler (vertical type)*2

2. Main tee roll forming machine*1

① Matching material:PPGI/GI

② Thickness: 0.3-0.5mm

③ Main power: 5.5kw 

④ Wall panel: standing plate with iron casting 

⑤ Forming speed: no stop cutting, all speed is 0-25m/min, with punch, it is 25m/min 

⑥ Shaft material and diameters: #45 steel and 50mm (Made the steel for cementation)

⑦ Roller material: Cr12  

⑧ Material of cutter blade: Cr 12 mould steel with quenched treatment，HRC 58-62℃

⑨ Forming Steps: 16 steps for forming 

Receiving table

Cross tee:

1. 2 tons manual de-coiler (vertical type)*2

2.Cross tee roll forming machine*1

① Matching material:PPGI/GI

② Thickness: 0.3-0.5mm

③ Main power: 5.5kw 

④ Wall panel: standing plate with iron casting 

⑤ Forming speed: no stop cutting, all speed is 0-25m/min, with punch, it is 25m/min 

⑥ Shaft material and diameters: #45 steel and 50mm (Made the steel for cementation)

⑦ Roller material: Cr12 with well heat treatment ,58-62   

⑧ Material of cutter blade: Cr 12mould steel with quenched treatment，HRC 58-62℃

⑨ Forming Steps: 16 steps for forming 

3. Receiving table

Angle:

1. 2 tons manual decoiler (vertical type)

2. Angle roll forming machine:

• Matching material: Galvanized  steel .thickness :0.3-0.5mm  

• Speed about : 0-40m/min with servo tracking punch and cutting (automatic control)

• Material of forming rollers: Cr12

• .Material of cutter blade: Cr 12 mould steel with quenched treatment，HRC 58-62℃

• Controlling system: PLC

• Roll forming step: 8 steps

3. Receiving table