Our SDS-Plus Light Hammer has the following characters:

1. There are three functions of the hammer, pick and drill

2. It is light and portable, easy to carry and work

3. The No-load speed is: 0-900rpm

4. The drill capacity is Dia.20-26mm

Technical Specification

Precautions for use of electric hammer 

1. Check before operation: a. the shell and handle shall not be cracked or damaged; B. the cable cord and plug shall be intact, the switch shall operate normally, and the protective zero connection shall be correct, firm and reliable; C. All protective covers shall be complete and firm, and the electrical protection device shall be reliable.

2. After the machine is started, it shall operate without load, and check and confirm that the machine linkage is flexible and unimpeded. During operation, the applied force shall be stable, and excessive force is not allowed.

3. During the operation, the handle of electric hammer shall be mastered. When drilling, the drill bit shall be propped against the working surface of special-shaped rivet first, and then it shall be started with moderate force to avoid shaking; if the rotation speed drops sharply, the force shall be reduced to prevent the motor from overloading, and it is strictly prohibited to carry the pressure with wood.

4. When drilling, pay attention to avoid the reinforcement in the concrete.

5. Electric hammers shall be 40% intermittent working system and shall not be used continuously for a long time.

6. When the operation aperture is more than 25 mm, there shall be a stable operation platform and guardrails around.

7. Overload is strictly prohibited. Pay attention to the sound and temperature rise during the operation, and stop the machine for inspection in case of any abnormality. When the operation time is too long and the temperature rise of the machine tool exceeds 60 ° C, the machine should be shut down and the operation should be carried out after natural cooling.

8. During operation, it is not allowed to touch the electric hammer's electric saw tools, molds and grinding wheels by hand. If it is found that they are blunt or damaged, it shall be stopped immediately for repair or replacement, and then continue to work

FAQ

1. Q: What is your usual payment terms?

A: L/C, T/T

2. Q: How long is the warranty of your products?

A: 12 Months

3. Q: How about your delivery time?

A: Usually 45-60 days after order

4. Q: What is the voltage of the hammer?

A: 220V