Product Overview

Remote IO system consists of network adapter module and extended IO module.
The network adapter module controls fieldbus communication and it realizes
communication link with host station controller or host computer software.
The extended IO module controls the connection with the input and output
sensors in the field. At first the Input IO module collects the field signals and sends it
to the network adapter through the internal bus. Secondly the controller reads and
processing data from the adapter through the field bus, and it writes the output data
into the network adapter, then the network adapter could write the output data into the
output IO module via the internal bus, so the the field equipment control could be
realized.
According to the communication interface of the controller system, the network
adapter could select the corresponding bus module and mainstream industrial
communication protocols including Modbus, Profibus-DP, Profinet, EtherCAT,
EtherNet/IP, CANsopen, CC-Link, PowerLink, etc. And there are 6 categories of
extended IO modules such as: digital input module, digital output module, analog
input module, analog output module, special module, hybrid IO module, etc.
The network adapter and the extended IO module could be freely combined
according to the field requirements, and it could achieve lower cost with the Remote

CN-8033 EtherCAT Network Adapter
1 The module overview
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access.
The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It
supports 32 pcs of extended IO modules.
2 Technical Parameters
Hardware Specification
System Power
Nominal: 24Vdc, Range: 9-36Vdc
Protection: Overcurrent Protection, Reverse Protection: YES
Power Consumption 110mA@24Vdc
Internal BUS
Supply Current
Max:2A@5VDC
Isolation  System Power to Field Power Isolation
Field Power Supply Power Supply:22~28V( Nominal 24VDC)
Field Power Supply
Current
Max. DC 8A
I/O Modules
supported
32 pcs
Wiring Max.1.5mm2(AWG 16)
Mounting Type 35mm Size DIN-Rail
Size 115*51.5*75mm
Weight  130g
Environment Specification
Operational Temperature -40~85oC
Operational Humidity 5%~95% RH( Condensation )
Protection Level IP20
EtherCAT Parameter
Protocol EtherCAT
Process data area  Input Max.1024 Bytes, Output Max.1024 Bytes
Network Interface 2 RJ45
Speed  10/100Mbps, MDI/MIDX, Full-Duplex
Max.Bus Legenth  100m