Steel sprocket drive system, synchronous shaft belt gear drive system

(I) Structure: all steel structure, main load-bearing frame with imported 1.2mm electrolytic steel

The board and other parts are made of high quality electrolytic steel with the thickness of 1.0mm bare board.All production links

Imported high-end CNC machine tool laser CNC cutting center cutting, positioning hole cutting, CNC bending

Electronic pulse numerical control spot welding from.Cabinet surface by degreasing, pickling, phosphating and so on nine

After station pretreatment, use the imported American brand Akzo epoxy powder spray.adhesion

High surface hardness, corrosion resistance, beautiful appearance color.The lining board of the cabinet is fixed by the company

Patented design of card groove assembly, no exposed screws, convenient for future maintenance and disassembly.

(2) window: the glass is tempered glass 5mm.The safety sliding door is equipped with pulley

Meter, rise and fall flexible free, can stay in any position, with rubber buffer limit device.move

Movable door handle and sliding glass door are integrated and of the same width, which is convenient for users to apply force on upper and lower handrails.

Meet the requirements of ergonomics.

(III) LED lights :LED lights have long service life and energy saving.LED lights and 5 mm

Toughened lampshade glass is hidden on the roof, not in direct contact with the gas in the fume hood, to avoid decay

Corrosion hidden trouble, easy to replace.Ultraviolet disinfection lamp can be selected or installed according to customer requirements.

(4) Transmission system: It is embedded with 11 steel wire toothed belts and rotating synchronous shaft gears

The pulley is made of aluminum alloy, durable and anticorrosive, with accurate transmission and no sliding when working.

It has constant transmission ratio and no off-balance load.Smooth transmission, with buffering, vibration reduction ability, noise

Low.High transmission efficiency, convenient maintenance, no need of lubrication, low maintenance cost.No pollution, it can work normally in places where pollution is not allowed and the working environment is relatively bad.

(5) sliding door handle: the window handle adopts aerodynamic design and is completely closed in the window

After closing, fresh air can enter cabinet put oneself in another's position through shake handshandle reserve open hole, shake handshandle leaves elliptical hole

It can be used as the ventilation function of fume hood, increase the exhaust volume of fume hood, and discharge poison in time and effectively

Gas to improve operator safety.

(vi) Power supply: Two 16A laboratories of 220V are equipped on both sides of the upper cabinet and at the lower end

Special five hole power socket, power off switch for delixi brand leakage protection switch, leakage switch

It is equipped with a splash proof and waterproof protective box.

(7) Exhaust outlet: cone-shaped, tapered, corrosion-resistant, one-piece air cover with the bottom entrance

Rectangular opening, top outlet pipe diameter of about 250-315mm, can be directly connected to the air duct.Set the gas

The hood is designed with taper wind Angle (30°-90°) and smoothness to reduce pressure loss and noise

In order to obtain good gas collection average and low pressure loss.

(8) The lower cabinet body of the fume hood is the storage cabinet, the lower cabinet is two opposite cabinets and the cabinet is fastened

The hand for the whole steel one pressing molding double-sided buckle hand, with the cabinet frame in the same color, the cabinet body for the disassembly type drop

Floor type full steel cabinet body, each fume hood is equipped with opposite door style bottom cabinet unit, not lower cabinet hinge

Exposed to hide - type hinge, anti-corrosion design beautiful.The lower cabinet can be selected according to the actual needs of customers:

Devices such as inflammable and explosive fire prevention cabinet, acid and alkali cabinet, waste liquid collection cabinet, garbage recovery, air exhaust pipe and so on

(9) Cabinet cavity: Inner liner plate and guide plate: 5mm thick heart anti-double special

Plate, acid and alkali resistant, organic solvent resistant, high temperature resistant.Three stage guide exhaust, guide plate can be according to

All kinds of volatile chemical gases with different density and different molecular weight are penetrated in the fume hood

Base, rapid discharge.

High temperature resistant ceramic fiber lining board is optional in fume hood: back board, guide board and lining

Board and roof: ceramic fiberboard of 5mm thick special fume hood for laboratory.sex

Can: 1200 degree high temperature, acid and alkali corrosion resistance, flame retardant, automatic flameout, internal and external material one

As a result, smooth surface and white inside and outside, flame retardant up to UL 94 V-0 grade, three - derivative

Flow exhaust.

Table surface of solid core physical and chemical board: 12.7mm solid core physical and chemical board with physical and chemical board

With acid, alkali resistance, wear resistance, fire resistance, moisture resistance, excellent bending and impact resistance,

Corrosion resistance, safety and environmental protection characteristics.

Optional ceramic countertop for ventilation counter: 28mm thick industrial ceramic countertop for laboratory,

The overall concave of the experimental operation area is 8mm, and the warped edges on all sides can effectively block water and prevent harmful liquid

Spillover.It can be equipped with a special milky ceramic cup for the laboratory.Four side belt one - shaped ceramic edge warping

Can effectively prevent liquid spill;Strong corrosion resistance, ultra-high temperature resistance, wear resistance, easy to clean, never

Deformation and discoloration, beautiful and generous, safe and environmental protection, free of maintenance.

Ventilation counter surface can be installed with epoxy resin table: 26mm thick table, experimental operation area

Area overall concave 8mm, around the butterfly shaped water edge, prevent harmful liquid overflow.Configurable experiment

Special epoxy resin water cup for room.Strong corrosion resistance, wear resistance, easy to clean, do not change color, beautiful

Generous, safe and environmental protection, free of maintenance.