Introduction to the lead feeder：

u Lead edge feeder, stable and accurate. Upper feeding roller is rubber coated to protect the board from damaging, the lower feeding roller is ceramic material coated with rough surface to enhance friction force and prolong the using life.

u Dust removal device: the cleaning brush and the suction fan can clean the dust on surface of corrugated board to improve the printing quality.

u Side baffle is motorized control. Flapping device to make the sheet pile in good shape.

u Control system

A. All parameters can be showed and adjusted in the main touchscreen. The phase of each unit, box length,width and height can be setted in the main touchscreen,

B. Memory system: Production orders can be saved and recalled to save changing time.

C. Ink alarm system, the buzzer sounds when the printing unit be lack of ink.

Introduction to printing unit:

u Memory system for easy operation and maintenance.(This system can help to remember position of printing cylinder when operator stop the machine and open it to adjustment on printing plate. After finishing adjustment and close the machine sections, people can use this system to make printing cylinder return to the former position (before stop and open sections).

u 7.0 inch touchscreen on the printing unit,The printing register is computerized control. The printing cylinder is motorized and computerized moved axially(±5mm).

u A emergency stop is adopted to assure the operator’s safety when operating between the machine units.

Introduction to the slotting unit:

u Single shaft double knives slotter,7.0 inch touchscreen on the slotter, box height, box length and width are all set by PLC and can be stored in the computer, saving the changing time.

u The up knife,lower knife, pre-creaser and creaser are synchronously moved. The precision liner slideway can ensure the flexible and stable of moving.

u The up creaser wheel is covered by rubber anvil to protect the corrugated board from damage.