ID:20110934444
Metallurgy,Chemicals & Energy Organic & Inorganic Chemicals
MOQ:1.00 KG
silicone greasethermal conductive greasegrease lubricating grease Silicone Lubricating Grease transparent silicone grease
L/CT/TWestern UnionPaypalOthers
SI112 Silicone Lubricating Grease
?Product Description
SI112 is an efficient silicon oil base, transparent silicone grease, specially used in dielectric isolation, surface protection, demolding and lubricating, etc. applications.
?Key Features
1. Excellent dielectric property
2. Excellent water and oxidative resistant performance
3. Operating temperature range (-50°C to 200°C)
4. Adhere well to metal, ceramic, rubber and other isolation materials
5. Excellent corona resistance
6. Non-poisonous and low volatile
?Typical Applications
1. Isolation protection
2. Water and moisture proof (Ignition systems, insulated switch, transformers, power equipment, cables, etc.)
3. As aging retarder for plastic and rubber
4. As surface protective agent for metals (Ignition system, TV anode cap, battery terminals, cables and connectors, etc.)
5. Good adhesion of machine and seal ring
6. Sealing and crack pouring in electronics

?Technical Data Table
PROPERTY | STANDARD | VALUE |
Color | Visual inspection | Transparent/Light grey |
Density | 25°C, g/cm3 | 1.0 |
Penetration (Static) | mm/10 | 250 |
Penetration (Dynamic) | mm/10 | 350 Max |
Oil Bleed | 24hours, 200°C | 12% Max |
Volatility | 24hours, 200°C | 2% Max |
Volume resistance | 200°C, ohm-cm | 1×1012 |
Dielectric constant | MHz | 2.9 |
Power factor | 100Hz -10MHz | 0.0025 |
dielectric strength
| 1.25mm gap, kV/mm | 19.5
|
Note:All above data were tested under standardized condition, or tested by further experiments.
?Directions for Use
Apply with grease gun, daubing or using brush. Can be used through spraying or soaking when the concentration is 10%
?Packing and Storage
1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
When stored at 1~30°C in the original unopened containers, this product has a usable life of 12 months from the date of production. Once opened a container, should use out as soon as possible, do not put used material back to the container, in case of cross- contamination.
?Safety Operation Data
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SEPNA or other distributors, or mail to service center sepna@sepna.cc, or call +86-400-882-1323.
?Warranty and Liability
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.

Business Type:Manufacturer
Online Supplier