Product Category
Print,Pack,Plastic > Rubber & Plastics Products
Trademark
I am a Buyer
OR
By clicking Sign in or logging in with Google or LinkedIn, I agree to the User Agreement and the Privacy Policy .
Business Type: Manufacturer
Main Products:Protective & Cushioning MaterialAdhesive Tape,Film,PaperProtective FilmPE protective filmPVC Protective Film
ID:20111842013
Category: Print,Pack,Plastic Rubber & Plastics Products
MOQ:5000.00 Square Meter(s)
Laser cutting Laser cutting filmprotective filmlaser filmlaser cutting filmrubber film
L/CT/TD/P
1.Technical Data Sheet
Name: | specification: | SD-LF300 | |
Scope of test: | National standard | Color: | Black& Dark white |
Thickness of Basic film: | 70um± 5um | Thickness of glue: | 8um±2um |
1.1 Use range
This product is suitable for laser cutting and process protection of stainless steel plates. It can be closely attached. High-power fiber cutting, carbon dioxide cutting and air cutting laser cutting equipment can be used. If you need low-power cutting, please contact our company for sample matching .
1.2 Test instrument
Languang XLW-intelligent electronic tensile testing machine KJ-2091 programmable constant temperature and humidity testing machine |
1.3 Test environment
Temperature: 23±2℃ | Humidity: 60±5% |
1.4 Product performance
Item | Physical requirements |
Substrate components | Modified PE |
Glue type | Nature Rubber PSA |
Exterior | No crystal points, no impurities, no wrinkles; uniform color, no color difference, flat end surface |
High temperature and humidity resistance | Test conditions: a constant temperature and humidity box with a temperature of 70±2°C and a humidity of 95%±5%; keep for 48 hours. Judgment result: no residue, no falling off, no ghosting. |
Tensile Strength
| MD≥15MPA TD≥10MPA |
Elongation at break | MD≥300% TD≥600% |
180°peel force | 2.0±1 N/2.5cm |
1.5 Conditions of Use
a. When using this product, ensure that the surface of the protected object is clean, free of oil stains, stains, solvent residues and dust impurities.
b. Pay attention to the viscosity change caused by the temperature change of the board when using it. It is recommended to apply the conditions at room temperature to avoid bonding bubbles.
c. It is necessary to apply vigorously during lamination. It is recommended to use special laminating equipment without air bubbles. After lamination, it must be placed for more than 72 hours before laser cutting can be performed. It is better to have pressure during the placement process to make the surface of the film and the sheet Better fit to achieve better cutting effect.
1.6 Product features
a. While protecting the stainless steel plate, it can be used for advanced one-time cutting and processing. It can be used for fiber and CO2 laser cutting at the same time, and it can also be used for air cutting with low quality requirements.
b. To ensure the integrity of the surface finish in each subsequent process.
c. The protective film will not blow up during the laser cutting process to prevent the formation of bubbles.
d. The product has excellent cutting effect, minimal edge shrinkage and neat cutting edges.
e. The product can be used for functional printing.
f. It can be easily removed when tearing the film, without film breakage and glue residue.
g. It can be used on products that require acid-base environment.
h. It is resistant to outdoor aging for 3 months, and can be stored indoors for more than 6 months.
Business Type:Manufacturer
Online Supplier