
Business Type: Manufacturer
Main Products:reforming catalysthigh temperature shift catalystlow temperature shift catalystmethanatiion catalystmethanol synthesis catalystmethanol steam reforming catalystmethanol cracking catalystZnO desulfurization catalysthydrodesulfurization catalystpre-reforming catalyst
ID:20112743841
Category: Metallurgy,Chemicals & Energy Organic & Inorganic Chemicals
MOQ:1.00 KG
nickel catalystMethanation catalystmethanation
L/CT/T
1. 概述 General Introduction
SCST-241型甲烷化催化剂用于将天然气、焦炉气、煤制气等合成气中CO、CO2和H2转化为CH4的过程,主要用于深度净化,使气体中CO+CO2≤10ppm。经改性后,也适用于以煤、焦炉气为原料合成CNG、LNG等装置,转化率达99.9999%以上。
Methanation catalyst
SCST-241 is mainly suitable for synthesis ammonia or hydrogen producing plant to convert the low concentration of carbon monoxide and carbon dioxide in the hydrogen-enriched feed gas to methane and water. The conversion rate is above 99.9999%.
主要反应如下:the main reactions are as following:
CO+3H2 = CH4+H2O+206.2 kJ/mol
CO2+4H2 = CH4+2H2O+165 kJ/mol
2. 物化性能 Physical and Chemical Properties
型 号Item | SCST-241 |
外 观 Appearance | 灰黑色球体 Dark black sphere |
规 格Size | Φ3~4/ Φ4.5~5.5 |
抗压碎强度 Radial Crush Strength | ≥110 / ≥140 |
堆密度 Bulk Density | 0.9±0.05 Kg/L |
主要组分 Main Components | NiO -Al2O3-助剂等 NiO-Al2O3-auxiliaries |
可根据用户需要提供其他尺寸的催化剂。
Catalysts of other sizes can be supplied according to the needs of users.
3. 操作工艺条件Operation Conditions
原料气中硫含量 S content in feed gas | ≤0.1 ppm |
原料气中氯含量 Cl- content in feed gas | ≤0.03 ppm |
操作温度 Operation Temperature | 230℃~430℃ |
一段炉入口温度 Inlet temperature on primary stage | 230~270 ℃ |
操作压力 Operation Pressure | 0.5~32.0MPa |
原料气空速 Space Velocity of the Feed Gas | ≤13000h-1 |
CO+CO2出口 CO+CO2 Outlet | ≤10ppm |
4. 催化剂特性Product Advantages
1) 还原时间短,22小时可以串气,节约还原时间,降低能耗;
Shorter reduction time and saving energy and the material gas can enter after 22 hours ;
2) 耐高压、高空速,在32Mpa压力下运行空速可以到达15000-1;
Resistance to high pressure, high space velocity: The space velocity can reach 15000h-1 at 32MPa;
3) 新型助剂添加,转化率高、低温活性好,出口一般低于5ppm;
With the new auxiliaries addition, it has a high conversion and high activity at low temperature. the outlet usualy is less than 5ppm;
4) 本体不含物理水、体积收缩率低,还原后强度下降率低;
No physical water, lower volume shrinkage and lower strength reduction rate after reduction.

Business Type:Manufacturer
Online Supplier