Acrylic emulsion polyurethane coating

Acrylic emulsion polyurethane coating

Description

CD-poly is a synthetic polymer waterproof coating by one component reaction. CD-poly is a colorful liquid consisting of plasticizers, curing agents, thickeners, coagulants and fillers.

Characteristic:

●Milky color

●Anti-dust &Anti-static, easy cleaning, self-cleaning under rainwater

●Anti-snow

●High firmness &Anti-aging effect

●Non-toxic, harmless green environmentally friendly product

●Easy using way, using at room temperature

Where to use

●Undergrounds, cold stores and grade;

●Bathroom, kitchen and pools;

●Hard to dry substrate of underground construction;

●Subways, channels, bridges, tunnels and unexposed roofs;

Advantages

●Can be applied on the wet underground substrate with strong bonding power;

●Multipurpose to apply on horizontal planes, vertical planes and top planes;

●Seamless, no pinholes and bubbles;

●Liquid with cold applied;

●Fast solidify and convenient to apply.

Packaging

CD-poly are sealed in 20kg pails, respectively, transported in wooden cases.

Storage

CD-poly material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources.

Transportation

CD-poly is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.

Application System

lConstructive System

The system is basically consisted of substrate, additional layer, waterproof coated membrane and protection layer.

lCoverage

1.7kg per m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.

lApplication Method

Surface preparation

Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.

Additional layer

Paint CD-poly as additional layer to enhance at internal and external corners, drain pipes, floor drains or embedded parts.

Application of waterproof coated membrane

It can use rubber scrapers or spray equipments to paint 2 or 3 times. After fully dry, it can be painted again. The normal time between each painting is 24 hour. The direction of second time painting needs to be perpendicular to the first time painting.

Application of protection layer

After waterproof coated membrane is fully dry and meets quality requirements, it can begin application of protection layer.

Notice

l This product is not dangerous goods, non-toxic, tasteless, no burning.

l Temperature at 35℃ should not be higher or lower than 5℃ construction, rainy days may not be construction at 5 ℃ - 35 ℃, shelf life for a year and a half.