Electric pipe threader machine 1T50 is an electric motor driven machine which centers and chucks pipe, conduit and rod (bolt stock) and rotates it while threading, cutting and reaming operations are performed. Forward (clockwise) or Reverse (counterclockwise) rotation can be selected with the FOR/OFF/REV switch and a foot switch provides ON/OFF control of the motor. The threading, cutting and reaming operations can be performed by conventional hand tools or tools designed for mounting on the Power Drive. A manual oiling system is available to flood the workpiece with thread cutting oil during the threading operation.

The Power Drive of threading machine can also be used as a power source for roll grooving machine. the roll   grooving machine can be mounted to its power drive by remove cutter, reamer and carriage, then it will be an electrical grooving machine. very convenient to disassemble and assemble.

Technical parameter

Thread forming ability: Pipe : 1/8 "-2", bar : 1/4 "-2"

Output speed: 40RPM and 20RPM optional

Generator style:Permanent magnet brushless synchronous motor

Power of motor:1.8kw

Motor speed:5840RPM

Input voltage:220v or 110v

Working current (2 inch tube processing):5 amps（20RPM) or 6 amps(40RPM)

Weight (thread machine body only):60KGS

One machine comes with below spare parts.

One set power drive (including motor and controller)

One set pipe stand

One set cutter

One set reamer

One set carriage

One set die head with dies inside

One set oil gun

One set oiler

One set foot switch

One set transporter

One bottle of grease