Composite coupling

1.The composite coupling is designed to be the facility like a high-speed cooling tower which definitely needs a long axis. This axis has very long DESE(Distance Between Shaft Ends). Therefore, if we use steel materials as an axis, it tends to cause a big deflection phenomenon during rotation because of its self-Ioad

2.In this case, we have to use the fixture and bearings to support the middle part of the long axis to minimize the deflection as shown in the picture below.

3.However, the long axis of the coupling made of the composite material which weighs only 20% of the steel material can reduce deflection conspicuously compared to the same standard coupling made of steel material. Once the composite material is used, the length of the axis can be extended by as much as 80% without using the fixture and bearings

The composite material adopted is only 20% the weight of steel material, so the length of the coupling shaft of composite material is 80% longer than that of steel, and no support bearings are required. This is a kind of coupling specially designed for cooling tower fans. 

Range : Maximum torque up to 4090Nm 

Size & Type : From CTKU-N to CTKU-N-229 

Model : General Application : Cooling towers. 

Industries : Metal casting, electricity, plastics, rubber, textiles, steel & iron works, chemistry, petrochemistry, food, pharmaceuticals, etc.