Intelligent Water Spray Retort

This kind of Retort Autoclave has three models:
1. shower/cascade spary 

2. both-side spary

3. full range spray

You can choose your model you prefer as per your demand.We also can customize the retort machine according to your requirement or your drawing.The machine is adjustable according to the product to be processed，and the space between nozzles are also customizable according to the height of production.

By employing the precise spraying method in the direction of the nozzle, we aim to ensure the precise and uniform heated water dispersion all the way to the center of each tray.
Performance features:
1. Intelligent PLC control, multi-level password authority, anti-misoperation lock function;
2. Large flow easily removable filter, flow monitoring device to ensure that the circulating water volume is always constant;
3. Imported 130° wide-angle nozzle to ensure all products fully sterilized without cold point;
4. Linear heating Temp. control, comply with FDA regulations (21CFR), control accuracy ±0.2℃;
5. Spiral-enwind tube heat exchanger, fast heating speed, saving 15% of steam;
6. Indirect heating and cooling to avoid secondary pollution of food and save water consumption.
Direction for use:
1.Put the filled products into baskets， then send them to sterilization retort. Then close the retort door. The door is safety interlock to ensure safety. And the door is locked in a mechanical way during the entire process of sterilization.
2. Sterilization process is carried out automatically in accordance with the data input to microprocessor controller PLC.
3. The heat exchanger of retort is used for heating or cooling phase, where process water goes through one side of it, and the cooling water flows through the other side, so that the sterilized product is not in direct contact with cooling water to achieve sterility cooling.
4. Throughout the process, the pressure inside the retort is controlled by a program which controls two automatic valves to feed or discharge compressed air in or from retort. As it is water spray sterilization, pressure in retort is independent of temperature and can be set freely depending on the product packaging to make more extensive use of the equipment (boxed, three-piece cans, two-piece cans, flexible packaging bags, bottles, etc. while adapting).
5. By the end of the sterilization, alarm signal will be displayed. It is time to open the door and unload. Then prepare the next batch products for sterilization.
6. The temperature distribution uniformity of retort are + / - 0.5 ° C