1. Product Name：Clay Refractory Mortar

2. Item Code：A4101

3. Product Introduction：

Composition of clay refractory mortar

Clay refractory mortar is made from calcined clay (clinker), waste clay brick powder and combined clay (raw material). Clinker is major component of clay refractory mortar with content of about 75%~80%. Raw clay is a binder which its function is enhancing plasticity of the mortar and reduce breathability and water loss rate. However, the batching amount of raw clay cannot be too large, otherwise it will be easily cracked. The proper batching amount should be 20%~25%.

4. Application

Clay refractory mortar is mainly used in furnace body joint and repair of different kinds of furnace with clay brick masonry, such as blast furnace, hot air furnace, coke oven, soaking furnace, heat exchanger and boiler.

5. Characteristics

Clay refractory mortar, as joint material, is able to adjust size deviation of bricks to make masonry structure regular with uniform load, and strengthen the masonry as a compact whole, so as to resist damages of external forces and avoid invasion of gas and molten liquid.

1) Good plasticity and construction convenience.

2) Sufficient bond strength to combine the masonry as a solid whole at working temperature;

3) Low thermal conductivity.

6. Physical and Chemical Indicators

We will provide the most suitable refractory product and quotation based on different customer demands. If any interest, please feel free to let us know. Looking forward to your kind enquiry.