Oil Drill Bits PDC Petroleum Drilling HS100

PRODUCT SPECIFICATIONSSize 4- 5/8 inch (Φ118mm)Model number118HS3532SABody typeHigh Manganese SteelNumber of blade5Primary PDC cutter size1308Number of nozzle 5Diameter of nozzle 12 mmGauge length34.67 mmAPI connection API 2-7/8 REGMake-Up Torque(KN.m) 8.2~9.5(2.09)KN·m(Mpa) Suitable formation Abrasive formationWeight On Bit(WOB)4-16 TRotary Speed(RPM)60-240r/minApplicationOil & Nature Gas  QualityHigh LevelPackageIron CaseMOQ1 PieceCertificateISO 9001OEMYesCustomized SizeYesCharacteristics:1. The crown surface of the bits is long cast surface which is suitable for abrasive formation.2. The conical surface is shallow, so the bit has good orientation,good cleaning effect and strong aggressivity.3. The relatively short gauge length can reduce the torque due to the contact between the bits and the well wall. The gauge area has been reduced and contact force of the gauge surface has been increased. The design can enhance the lateral cutting force of the bits which helps the control of the well deviation. The gauge surface is inset by single-row PDC cutters gauge teeth in order to improve abrasive resistance.4. The exposed PDC cutter is welded at the bottom of the gauge surface,which prevents the bit from being sticked when it is lifted.